LED Conversion Kit – 2014-2016
$289.99 – $706.24
- Provides modern LED output
- Simple installation, with direct bulb swap
- Various brightness options
- Manufacturers Warranty
- Kit includes: 20 pcs – 194 Bulbs, 2 pcs – 921 Bulbs (Reverse), 8 pcs – 7440 Bulbs (Turn Signals & Brakes). And replaces: License Plate, Dome Lights, Map Lights, Glove Box, Front Parking Lights, Reverse Lights, Side Markers, Front Turns, Rear Turns, Headlight Marker Lights.
*NOTE: Turn Signals will be supplied in Amber (front) and Red (Rear). All bulbs will be shipped together if possible, if a certain bulb is out to stock the rest will ship separately.
- Additional information
We have put together 3 packages to suit your needs, Good, Better and Best in terms out light output.
GOOD: OEM Brightness, LED Crispness and instant on/off
– 194bulbs @ 24 Lumen
– Reverse @ 92 Lumen
– Turns @ 280 Lumen
– Brakes @ 280 Lumen
BETTER: Higher Brightness than OEM, Clean Crisp Light
– 194bulbs @ 56 Lumen
– Reverse @ 210 Lumen
– Turns @ 310 Lumen
– Brakes @ 310 Lumen
BEST: MUCH Brighter than OEM
– 194bulbs @ 92 Lumen
– Reverse @ 410 Lumen
– Turns @ 520 Lumen
– Brakes @ 520 Lumen
These LEDs illuminate in a crisp, cool, bright, white hue for maximum light output.
Diode Dynamics offers several brightness options so you can choose what fits you best. These options are listed by the design and the lumen output of each bulb:
HP5: Slightly lower brightness than OEM bulbs, but still provides the crisp, modern instant on/off of LED technology.
HP36: Slightly higher brightness than OEM bulbs.
XP50: Much brighter than OEM bulbs. These are bright!
Lumens. BUYER BEWARE! Most sellers just provide “calculated” lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.
These “calculated” lumen ratings are much, much higher than the true, measured light output, so it will look like competitors’ bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated “calculated” numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading “calculated” figures. Please click here to learn more about LED brightness measurement.
LED Components. Diode Dynamics uses only the highest quality LED chips in the production of its bulbs. This means we use only brand-name suppliers such as Epistar, Osram, and Samsung.
While Diode Dynamics bulbs may look the same as others on the market, most copycat bulbs use economy-grade LED chips in order to reduce costs. This greatly reduces the reliability and overall brightness of the bulb when you compare it to Diode Dynamics.
Construction. Although LED technology allows for extremely long bulb life, the market is flooded with cheap LED bulbs that fail prematurely due to inferior construction. The worst enemy of LEDs is excessive heat, and when bulbs are not designed properly, they do not disperse heat as well, leading to premature failure.
Off-brand, cheap bulbs exhibit poor solder uniformity, high levels of flux in the solder, uneven chip placement, low-gauge terminal wires, poor assembly, and bulbs held together with inferior adhesives. At best, solder joints will crack and fail on low-quality LEDs after a few weeks of use. In the worst case, these bulbs can damage housings as the extra flux and adhesive evaporates and creates a residue on the lens of the housing.
Diode Dynamics bulbs are produced with modern, computerized equipment, and only the best materials, to ensure complete uniformity, high quality, and long bulb life.
All Diode Dynamics products come with a 30-day satisfaction guarantee and a 3-year limited replacement warranty. For more information, please view the Warranty Information page.
Good, Better, Best