43405730_2092913030753954_126428027419623424_o

Magnuson Heartbeat Supercharger Kit

$7,995.00

TVS2300 Heartbeat Hybrid-roots supercharger
Clears the factory strut bar and hood
Weighs 17 pounds less than the standard TVS 2300
TVS2300 Front-Inlet Front-Drive rotors, utilizes the same Eaton technology as the Corvette ZR1 LS9
Provides cooler discharge temperatures than comparable twin-screw systems
Advanced high-flow inlet forward design
Includes Twin dual-pass charge-air-coolers utilise Formula-1 racing thermal-control technology
Acoustically designed to minimize noise, vibration, and harshness (NVH)
Better air-handling characteristics than comparable superchargers
100% complete bolt-on system which can be installed in one day
More power in a smaller package
Internal Bypass Valve virtually eliminates parasitic loss (uses less than 1/3 of a horsepower at 60 mph)
Delivers a proven increase in real world “under the curve” power
High thermal efficiency
2.4 pressure ratio capability
High helix four-lobe rotors with 160 degrees of twist
Redesigned inlet and outlet ports
Utilizes all factory “push-lock” connectors
Displacement on demand hardware retained for improved fuel economy
Components have been independently tested to GM’s specification

THIS MAGNUSON SUPERCHARGER IS BUILT TO ORDER AND SHIP TIME MAY VARY!!!!!!!

Additional shipping charges may be required outside the continental US!!!

Purchase and earn 7995 LSXOnly Points worth $79.95! *Must be logged in.

SKU: 01-23-62-055-BL Category: Uncategorized Tags: 2300, boost, heartbeat, magnuson, magnuson heartbeat, roots, supercharger

Description
Additional information

The most powerful TVS2300 Supercharger on the market
Magnuson is proud to announce our HeartBeat supercharger system for the 2012-2016 Chevrolet SS Sedan LS3. At just 6 psi, the Heartbeat adds over 125hp to the wheels. On our test car, a completely stock 2014 Camaro SS 1LE, bolting on the Heartbeat supercharger added 140hp to the wheels for a total of 530 rwhp (roughly 625 hp at the crank) on our Mustang dyno. Tested by two of the most respected engine builders in the industry, Lingenfelter Performance Engineering and Duttweiler Performance, Heartbeat made over 900 HP at a mere 10-11 psi, a credit to it’s unsurpassed airflow and inlet design. In a recent test, Lingenfelter delcared it was the most power they have ever made from a TVS 2300.Run cooler with the most advanced intercooler system available
Heat soak can be a problem in underhood supercharger systems, robbing more than half the power gain in the summer heat or after a few dragstrip runs. Heartbeat features integrated intercoolers derived from the same technology used in Formula 1 and NASCAR heat exchangers. Unlike other underhood supercharger systems, customers report low IATs and consistent performance all day long.Bolt on 125+ HP in a day
Magnuson Products supercharger kits are complete with all the components necessary for installation, and Heartbeat fits under the factory hood. Included in the kit is our brand new “HeartBeat” cast aluminum intake manifold, factory ‘push-lock’ connectors are utilized in the fuel system for installation ease, Twin dual-pass charge-air-coolers use Formula-1 racing thermal-control technology, coolant circulation pump, heat exchanger and all necessary hardware to make a complete installation package.What our customers are saying
“The new under hood Magnuson Heartbeat supercharger is engineering excellence. The placement of the intercoolers and runner design nets maximum efficiency. This unit is far superior to ANY under hood, positive displacement supercharger currently on the market”. – Steve E, Owner of Davenport Motorsports

“This is the most power we’ve ever made with a TVS2300 supercharger”. – Jason Haines, Lingenfelter Performance Engineering https://youtu.be/Z6gTQq6vn4w

Magnuson’s Heartbeat Supercharger – An Interview with Designer Ken Nunn

Features

TVS2300 Heartbeat Hybrid-roots supercharger
Clears the factory strut bar and hood
Weighs 17 pounds less than the standard TVS 2300
TVS2300 Front-Inlet Front-Drive rotors, utilizes the same Eaton technology as the Corvette ZR1 LS9
Provides cooler discharge temperatures than comparable twin-screw systems
Advanced high-flow inlet forward design
Includes Twin dual-pass charge-air-coolers utilise Formula-1 racing thermal-control technology
Acoustically designed to minimize noise, vibration, and harshness (NVH)
Better air-handling characteristics than comparable superchargers
100% complete bolt-on system which can be installed in one day
More power in a smaller package
Internal Bypass Valve virtually eliminates parasitic loss (uses less than 1/3 of a horsepower at 60 mph)
Delivers a proven increase in real world “under the curve” power
High thermal efficiency
2.4 pressure ratio capability
High helix four-lobe rotors with 160 degrees of twist
Redesigned inlet and outlet ports
Utilizes all factory “push-lock” connectors
Displacement on demand hardware retained for improved fuel economy
Components have been independently tested to GM’s specification

Intercooler System

Twin dual-pass charge-air-coolers utilise Formula-1 racing thermal-control technology
Back-to-back testing verifies the intercooler system is superior
Quick-connect fittings for easier installation

Upgrade Options

Upgradable throttle body adaptor available for large throttle bodies
Drive pulley options available for high-boost applications

Included Components

6th Generation TVS2300 Heartbeat Supercharger with integral bypass valve
Patented cast-aluminum high-velocity-port intake manifold
Twin dual-pass charge-air-coolers utilise Formula-1 racing thermal-control technology
8 high-flow fuel injectors
GM LS9 fuel rail system
Padded Box and UPS 2-Day shipping label for computer return
Large front-mounted heat exchanger
All necessary fittings, lines, belts, and hardware required

Warranty

Magnuson’s Power Train Warranties, we’ve got you covered!
With decades of OEM supply experience, Magnuson Superchargers proudly stands behind its industry leading product reliability and is now offering a Limited Power Train Warranty for our supercharger systems. Best of all its FREE with our Standard 3 Year / 36,000 Mile warranty program!

STANDARD 3 Year / 36k Mile – Limited Power Train Warranty PDF

Refer to the link below to see if your vehicle is covered under our “Limited Power Train Warranty”.

Limited Power Train Warranty Product Eligibility PDF

Magnuson’s Supercharger and Parts Warranty, quality we stand behind!

For products not covered under our 3 year / 36k mile powertrain warranty above, we offer a “Limited Parts Warranty”. Please click the link below to register your recent purchase:

Magnuson Products Limited Parts Warranty Registration FormNote: To submit a warranty request on a qualified purchased supercharger, please fill out the warranty request form under the “Contact Us” tab

Maintenance

Sealed supercharger rotor assembly requires no maintenance or oil change

Emissions Status

CARB certified, 50 State legal ARB EO# D-488-34

Tools Required

Metric wrench set
1/4in. – 3/8in. and 1/2in. drive metric socket set (Standard and Deep)
3/8in.and 1/2in. drive foot-pound and inch-pound torque wrenches
Belt tensioner wrench
Phillips and flat-head screwdrivers
1/2in. breaker bar
Fuel line quick disconnect tool (included in kit)
Small or angled 3/8in. drill
Drain pan
Hose cutters
Hose clamp pliers
Safety glasses
Torque angle meter
Hammer
Compressed air
Blow gun air tool
Metric Allen socket set 3/8in. drive
Shop vacuum cleaner
Blue Loctite
Right Angle drill for pinning crank pulley (when required)
Helpful Tool: Air or electric impact wrench

Average Installation Time

10-12 Hours

Size and Weight

Number of Boxes: 2
Box 1 Size: 34″x20″x16″
Box 1 Weight: 85 lbs.
Box 2 Size: 27″x14″x18″
Box 2 Weight: 40 lbs.

Installation Manual
Magnuson Chevy SS Supercharger Installation Manual PDF

Finish	Black Oxide, Stainless Steel
Head Type	6 pt., 12 pt.
Spacer/Washer Size	Standard (0.165˝)